(as of Feb 05,2023 13:29:13 UTC – Details)
Model: HSV563 RX only
Weight: 0.6 KG
Housing Materials: Metal
Operation Temperature: 0℃+40℃
Transmission Distance: 328ft-492ft/100-150m
Power: PoE(802.3AF,36V-57V,13W ) or 12V1A DC
Ultralow latency< 50ms for k/m control
Size of Each: 12.5cm x 2.5cm x 8.3cm
Ethernet Interface:RJ45 Gigabit Ethernet
External Audio Interface: 3.5mm L/R jacket
HDMI audio format：2ch/5.1ch/7.1ch/DTS/Dolby
USB protocol supported: USB2.0Hub full function
Working Humidity: 20% ~ 90% RH(Non-condensing)
Supporting Compliant Standards: HDMI 1.4; HDCP 1.4
Working Mode: Video: Point to Point / One to Multi-Reciever / Cascade
USB port:Sender: 1*USB2.0 to PC/Host; Receiver: 4*USB2.0 to USB device
Resolution Support: [email protected] / [email protected] / [email protected] /[email protected] / [email protected] / [email protected] / [email protected] / [email protected] / [email protected] etc..
HDMI KVM Extender for Office / Home / Meeting room
HDMI KVM EXTENDER with USB2.0
Problem you may meet
Q： Yellow light led of LAN port is not light?
A： 1. Check connection of network cable 2. Change short network cable to test 3. Check whether sender and receiver working correctly(Status LED flflash slow)
Q： Green light led of LAN port is not light
A： 1. Check whether the HDMI source is working correct. 2. Check whether the “signal” LED on sender side is light on. If not, please check the HDMI Connection, HDMI cable, HDMI resolution setting.
Q： No display on screen connect to receiver?
A： 1. Check the HDMI connection, HDMI cable between receiver and screen. 2. Check whether sender and receiver working correctly(Status LED flflash slow) 3. Check whether the screen support 4K, whether the output resolution supported by screen.
Q： USB device not work
A： 1.Check the USB connection between sender and PC/HOST 2.Check whether the USB connection LED is flashing 3. Press Button2 on receiver side to build USB connection between receiver and sender
Q: How to use the kvm extender work with local device?
A: This device support 1 sender to multi receivers, because it use broadcast protocol.So please beware that if you want to use this device with other devices in same local network. You need to build a VLAN connection between sender and receiver on management switch.
POINT TO POINT for Exhibition Hall
HDMI KVM Extender support the one send to reciever over 328-524ft cat5e lan cable with low latency kvm control.
One to many for Round table
Multi-slave control of a host’s networking. KVM and USB extension Support 1 TX to 253 RX over gigabit PoE switch.
Many to many via VLAN for Curtain screen
KVM and USB extender can extend the KVM and USB signal distance to 20 kilometers through the cascaded network extension of multi-level switches.
Package Dimensions : 6 x 4.2 x 2.3 inches; 10.41 Ounces
Date First Available : July 8, 2021
Manufacturer : shuone tech
ASIN : B098WRNRZX
【Multifunctional Extender】 KVM extender Resolution supports [email protected] 4:4:4, Ultra HD is completely lossless, low latency, support full-format HDMI audio, one to Many broadcast mode,USB2.0 pass-through. Meet your diverse needs.
【Long-Distance Stable Transmission】 Extends HD 3840*2160 30hz with extender kit over Cat5e/6 allows you to transmit HDMI audio/video up to 328 ft (100m) . The SHUONE TCHH supports overall delay less than 50MS. The cascade mode can extend the KVM signal and USB signal by up to 20 kilometers.
【Single Receiver】On the premise that only the receiver needs to be replaced, you don’t need to buy a transmitter, you only need to buy a single receiver, which can save your cost to the greatest extent.
【802.3af POE Power Over Ethernet】Support PoE（802.3AF）power supply, improve system robustness and convenience. Improve the stability and speed of signal transmission.
【Please Note】: This is just a receiver, not a transmitter. If you need to buy a transmitter and receiver, please search: shuone Transmitter and Receiver.